Also check that Pin 19 is connected to GND and Pin 20 is connected to +5V. Easiest to measure from the PWR2 header below the regulator.

On 3.1 (40.063) it boots to ROM splash or IDE if connected. 64MB Fast is recognised under WB and it passes the first few rounds of ATK memory test (before the memory test was abandoned). On 2.0 (37.175) it fires up to the ROM splash as normal. On 1.3 it fires up to the ROM splash as normal. I assume...

From the underside and shallow angle photos of the card the CPU appears to be soldered directly to the board without a socket so unfortunately swapping that out easily to test another is probably off the table.

You need to choose "Restore Virtual Hard Disk Image On Physical Drive" From the "Disk" menu in WinImage not "Open" from the "File" menu. You also need to be running WinImage as Administrator in order for the USB devices to be shown in full. 1. Plug in your USB...

This card has now been fully refunded.

Best to ask your builder for support in the first instance. i.e. me

Ah, apologies, I misunderstood.

I only envisioned the card being extended to the front side slot guide on the 2000 case, not the full length bonkers card dimensions of yore that went all the way to the backplate.

That's a whole lot of extra!

It is likely that the board house will charge the same or more for mouse bite panels added to the PCB as they would for the full length card. The detachable panels will still count towards the overall dimension of the board and that will probably be pretty steep on 4 layer. How about adding three M3...

Yes, I've not fitted that yet thought as the two flashers I have I'm having ussuesing flashing it, never flashed a cpld before. Anyone who can fkash then for me or help me to do it would be amazing. I've tried usb blaster v2 and a altera usb programmer, not even sure on what software to use. Like I...