dragmar's H5 rev. B1 build

Share your building progress here!
Post Reply
dragmar
Posts: 53
Joined: Mon Aug 06, 2018 8:12 am

dragmar's H5 rev. B1 build

Post by dragmar »

Finally I have started !

I have run out of a 40-pin DIP IC socket, and golpins on jumpers. FOR this I also need goldpins for the keyboard and a power socket. ?
IMG_20210214_114430_HDR.jpg
IMG_20210214_114430_HDR.jpg (320.93 KiB) Viewed 2072 times

Does anyone have information on good 6PIN sockets
User avatar
exxos
Site Admin
Site Admin
Posts: 23491
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: dragmar's H5 rev. B1 build

Post by exxos »

dragmar wrote: Sun Feb 14, 2021 1:37 pm I have run out of a 40-pin DIP IC socket, and golpins on jumpers. FOR this I also need goldpins for the keyboard and a power socket. ?
You don't need gold pins.. unless you like the bling..

dragmar wrote: Sun Feb 14, 2021 1:37 pm Does anyone have information on good 6PIN sockets
I don't think anyone bothered to socket it.. I really wouldn't bother.. Even things like the ACIS's, if they are known working and you dont place to swap them at any point, then just solder them in..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: dragmar's H5 rev. B1 build

Post by PaulJ »

Don’t know if your OWC is soldered in but I wouldn’t use a socket for it. Every time I took the power supply out it would dislodge the OSC. I finally removed the socket and soldered in the OSC.
Post Reply

Return to “H5 B1 USER BUILDS”