Not a dead short, and I can't check, but it seems like the resistance is a bit high.nick_p wrote: ↑Wed Apr 07, 2021 4:52 pm DMA chip removed.... still got just 43 Ohm resistance between 5V and GND on the board which I'm guessing isn't good.
345 Ohm between pin 20 and 40 on the unsoldered DMA chip so not a dead short or really high....
I think exxos might be right... move on to known working purchase.
Atari STFM 520 Black Screen via monitor out
- rubber_jonnie
- Site Admin
- Posts: 10472
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: Atari STFM 520 Black Screen via monitor out
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: Atari STFM 520 Black Screen via monitor out
Thanks all.
I've ordered a replacement chip anyway so will chuck it in once it arrives if I can work out why I have next to no resistance between the 5V pins on the board and GND first.
Cheers
Nick
I've ordered a replacement chip anyway so will chuck it in once it arrives if I can work out why I have next to no resistance between the 5V pins on the board and GND first.
Cheers
Nick
- rubber_jonnie
- Site Admin
- Posts: 10472
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: Atari STFM 520 Black Screen via monitor out
Much higher than I thought for a working one. Trouble is all my stuff is in storage ATM.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
- rubber_jonnie
- Site Admin
- Posts: 10472
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: Atari STFM 520 Black Screen via monitor out
I wouldn't worry too much about that, but before you fit the new DMA check that 5v is good at the socket.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: Atari STFM 520 Black Screen via monitor out
Ah okay, great stuff. Thanksrubber_jonnie wrote: ↑Wed Apr 07, 2021 6:30 pmI wouldn't worry too much about that, but before you fit the new DMA check that 5v is good at the socket.
Re: Atari STFM 520 Black Screen via monitor out
Hi all,
Quick update just to finish the thread..
The new chip turned up. I installed a new socket and tested voltages before installing the chip and they seemed good.
I put the chip in and powered on. Good news is the chip is no longer getting hot, and I now have an occasional flicker on the activity LED, and it sometimes spins up the FDD but unfortunately that's as far as it gets. (I've replaced the belt and cleaned the heads and can hear it is spinning the discs)
I've decided to cut my losses on this machine for now and have sourced a working STFM motherboard which I can transplant into my cases. Once I know that is working, I will spend an afternoon swapping chips between this board and the new one to see if I can work out what is good and isn't which may lead me to the issue, or at the worst, give me a set of working spares
Cheers
Nick
Quick update just to finish the thread..
The new chip turned up. I installed a new socket and tested voltages before installing the chip and they seemed good.
I put the chip in and powered on. Good news is the chip is no longer getting hot, and I now have an occasional flicker on the activity LED, and it sometimes spins up the FDD but unfortunately that's as far as it gets. (I've replaced the belt and cleaned the heads and can hear it is spinning the discs)
I've decided to cut my losses on this machine for now and have sourced a working STFM motherboard which I can transplant into my cases. Once I know that is working, I will spend an afternoon swapping chips between this board and the new one to see if I can work out what is good and isn't which may lead me to the issue, or at the worst, give me a set of working spares
Cheers
Nick
- rubber_jonnie
- Site Admin
- Posts: 10472
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: Atari STFM 520 Black Screen via monitor out
It does often go that way. I feel quite lucky that my experience and help from people on this forum over the years has really given me the confidence to dig deeper, but sometimes you're just stuck and the damn thing won't work.nick_p wrote: ↑Fri Apr 09, 2021 12:44 pm I've decided to cut my losses on this machine for now and have sourced a working STFM motherboard which I can transplant into my cases. Once I know that is working, I will spend an afternoon swapping chips between this board and the new one to see if I can work out what is good and isn't which may lead me to the issue, or at the worst, give me a set of working spares
Or like my Mega ST4, just keeps dying time after time.....
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: Atari STFM 520 Black Screen via monitor out
Cheers rubber_jonnie and all.
I'm definitely not giving up on this one, but a working one gives me more to compare and test against without bothering you experts, but I can guarantee I'll be back shortly with more questions
Cheers
Nick
I'm definitely not giving up on this one, but a working one gives me more to compare and test against without bothering you experts, but I can guarantee I'll be back shortly with more questions
Cheers
Nick