TF Riser Revision 0 Arrives

TF CD32 Riser

Moderators: terriblefire, Terriblefire Moderator

sampedenawa
Posts: 29
Joined: Thu Mar 14, 2019 4:22 pm

Re: TF Riser Revision 0 Arrives

Post by sampedenawa »

arkadiusz.makarenko wrote: Sun Mar 22, 2020 7:08 pm
terriblefire wrote: Sun Mar 22, 2020 4:50 pm

I wonder if this is a PHY limitation? Is this something that happens with the HID2AMI?
I don't know about hid2ami, but I hope f7xx it may be better.
Which devices you are referring to ?
Give me a detyailed list, I will check for you
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF Riser Revision 0 Arrives

Post by arkadiusz.makarenko »

sampedenawa wrote: Thu Mar 26, 2020 2:31 pm
arkadiusz.makarenko wrote: Sun Mar 22, 2020 7:08 pm

I don't know about hid2ami, but I hope f7xx it may be better.
Which devices you are referring to ?
Give me a detyailed list, I will check for you
I have one Dell HID mouse and one dirt cheap generic controller. Mouse did work on f730 chip, but it's not recognized on f105.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF Riser Revision 0 Arrives

Post by terriblefire »

arkadiusz.makarenko wrote: Fri Mar 27, 2020 8:27 am I have one Dell HID mouse and one dirt cheap generic controller. Mouse did work on f730 chip, but it's not recognized on f105.
Its not really an issue. The rev 1 will have the be pre-populated with the 7222RET. So long as it works on that chip.

I'm really excited to finally get USB keyboard, mouse and joystick support on my CD32.. saves the wires knocking the hot soldering iron into my crotch.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF Riser Revision 0 Arrives

Post by arkadiusz.makarenko »

terriblefire wrote: Fri Mar 27, 2020 8:43 am
arkadiusz.makarenko wrote: Fri Mar 27, 2020 8:27 am I have one Dell HID mouse and one dirt cheap generic controller. Mouse did work on f730 chip, but it's not recognized on f105.
Its not really an issue. The rev 1 will have the be pre-populated with the 7222RET. So long as it works on that chip.

I'm really excited to finally get USB keyboard, mouse and joystick support on my CD32.. saves the wires knocking the hot soldering iron into my crotch.
I am not aiming for 100% support anyway.
If devices are following the standard it must work.
I may add custom support for the most popular non-standard devices.
If someone can go to nearest Argos and buy set of keyboard+mouse and gamcontroller for like £30. That should be good enough for start.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
sampedenawa
Posts: 29
Joined: Thu Mar 14, 2019 4:22 pm

Re: TF Riser Revision 0 Arrives

Post by sampedenawa »

arkadiusz.makarenko wrote: Fri Mar 27, 2020 8:27 am
sampedenawa wrote: Thu Mar 26, 2020 2:31 pm

Which devices you are referring to ?
Give me a detyailed list, I will check for you
I have one Dell HID mouse and one dirt cheap generic controller. Mouse did work on f730 chip, but it's not recognized on f105.
Give me details (e.g. the Dell part number) or, better, send me a HID dump, I'll check.
Post Reply

Return to “TF CD32 Riser”