I recently finished refurbishing a nice STfm machine.
(Located in UK)
Specifications:
* C070789-001 Rev C Motherboard (UK keyboard, UK 240v PSU)
* TOS 1.02
* 1MB RAM (Enough to play almost every game ever produced)
* Fully cleaned & re-capped DSP-508a PSU
* Fully cleaned & serviced floppy drive
* Re-capped entire video circuitry & shifter capacitors
* Casing fully dismantled & washed in HOT soapy water & detol disinfectant
* Keyboard also fully dismantled & washed as above, plus PCB & ports serviced/cleaned
* Old floppy cable removed & new IDC header installed
Only thing that isn't perfect is the floppy case-hole, which has been cut-out to accept regular sized drives. Although this is fitted with an Atari original Epson drive (which runs really nice, quiet and reliable) But at least you can easily install a Gotek if you want, the hole is quite neat.
Extensively tested for hours using Diagnostic cartridge, floppy drive exerciser, gembench & Frontier loop.
Asking: £150 & £10 postage (locally)
Please confirm interest in forum post before pm'ing me,
cheers,
Main overview
PSU-Recap process
Floppy during service
Video circuitry re-cap & new floppy IDC header
Motherboard overview
Re-assembling
Functional tests