This should hopefully improve my ability to develop the DSTB1 firmware. Another machine and a different base for starters.
One thing I immediately forgot his how little memory 512k actually is!
BW
Now I have an STFM. Ho Ho Ho.
Now I have an STFM. Ho Ho Ho.
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
- mrbombermillzy
- Posts: 1468
- Joined: Sun Jun 03, 2018 7:37 pm
Re: Now I have an STFM. Ho Ho Ho.
At least you get a fully verbose error message. Not like @exxos' Gembench one.
Re: Now I have an STFM. Ho Ho Ho.
oh ?mrbombermillzy wrote: ↑Mon May 16, 2022 7:39 pm At least you get a fully verbose error message. Not like @exxos' Gembench one.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: Now I have an STFM. Ho Ho Ho.
@mrbombermillzy oh, That is not a out of memory error message though
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- mrbombermillzy
- Posts: 1468
- Joined: Sun Jun 03, 2018 7:37 pm
Re: Now I have an STFM. Ho Ho Ho.
Also I haven't fitted the booster yet.
Got to desolder this 68K... Not looking forward to that!
BW
Got to desolder this 68K... Not looking forward to that!
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: Now I have an STFM. Ho Ho Ho.
Right, so serious question, all.
I don't think I'm too shabby at soldering SMT.
I reckon I can hold my own on most through hole providing elegance isn't on the scoresheet.
But I've always considered myself a little sub-optimal when it comes to desoldering through hole parts.
I have a cheap self-heating manual desoldering pump which is normally decent enough to let me get caps, resistors and the like off board, but I don't have a fancy electrically pumped desoldering station or anything like that.
Now I want to develop on this STFM motherboard. I'm going to have to socket the CPU. That's DIP64... I'm quite worried that my normal technique of flux, more solder, desoldering pump, bit of wiggle and hot air from the top isn't going to cut it.
So, how tolerant of soldering iron incompetence are these old boards? I'm going to hazard a guess 'not very much', but since I've never done it before, I thought I'd ask in case actually they're famously easy (one can but hope...).
I'd rather not sacrifice a perfectly good 68k, but it's only an old 8MHz one and if the general consensus is 'don't risk it', then I'll snip it off and do the legs one at a time.
Opinions? Advice?
TVM,
BW.
I don't think I'm too shabby at soldering SMT.
I reckon I can hold my own on most through hole providing elegance isn't on the scoresheet.
But I've always considered myself a little sub-optimal when it comes to desoldering through hole parts.
I have a cheap self-heating manual desoldering pump which is normally decent enough to let me get caps, resistors and the like off board, but I don't have a fancy electrically pumped desoldering station or anything like that.
Now I want to develop on this STFM motherboard. I'm going to have to socket the CPU. That's DIP64... I'm quite worried that my normal technique of flux, more solder, desoldering pump, bit of wiggle and hot air from the top isn't going to cut it.
So, how tolerant of soldering iron incompetence are these old boards? I'm going to hazard a guess 'not very much', but since I've never done it before, I thought I'd ask in case actually they're famously easy (one can but hope...).
I'd rather not sacrifice a perfectly good 68k, but it's only an old 8MHz one and if the general consensus is 'don't risk it', then I'll snip it off and do the legs one at a time.
Opinions? Advice?
TVM,
BW.
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: Now I have an STFM. Ho Ho Ho.
Honestly get one of these types of things https://www.exxosforum.co.uk/forum/viewt ... 982#p69982
I gave up with a de-soldering pumps. Can't use the things anyway with my RSI
I gave up with a de-soldering pumps. Can't use the things anyway with my RSI
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.