Just upgraded the Ultra to a quad core today, still waiting on the ram but then I did only order it yesterday.,
This machine doesn't run too bad now considering it's 14 years old.
Next I have to decide if i'm going to upgrade the graphics or stick with the Quadra 380 for authenticity? I really don't need it to do anything fancy, i've got a decent iMac and Windoze laptop if I need that sort of thing.
PhilCs blog / the latest things hes broken(fixed)
Re: PhilCs blog / the latest things hes broken(fixed)
If it ain't broke, test it to Destruction.
Re: PhilCs blog / the latest things hes broken(fixed)
If I were putting a modern OS on it, I'd go for a good graphics card so that simple stuff like Youtube is off-loaded from the CPU etc. But if I were going for Solaris, I'd stick with what it was meant to have for support.
Re: PhilCs blog / the latest things hes broken(fixed)
Very good point Steve, I have a GTX960 spare that I may try and see if it'll work slow enough to fit in this
If it ain't broke, test it to Destruction.
Re: PhilCs blog / the latest things hes broken(fixed)
So the Ultra 24 got a graphics card upgrade to an Nvidia Quadro K2200. I didn't see the point in going to something daft but did want to have what may have been a reasonably quick workstation card upgrade that may have been fitted at the time this machine was new. Considering I went from one quadro to another the actual quality upgrade is pretty good. Now I just need to find a bigger monitor for it.
In other news I've been experimenting with repairing some of the broken lugs etc on a few of my ST cases. I've been using a 3d printer pen with ABS in it and then building up the areas that needed repair and then sanding till they look the right shape and are strong enough to hold things together. So far so good. Will post some pics later on.
Then in other news I made a silly offer for a Sun server thinking I'd never get it, only yo have had my offer accepted.
So now I've got to work out what to do with it. No hard drives but 2 lots of 6 core Xeons. Any suggestions guys?
In other news I've been experimenting with repairing some of the broken lugs etc on a few of my ST cases. I've been using a 3d printer pen with ABS in it and then building up the areas that needed repair and then sanding till they look the right shape and are strong enough to hold things together. So far so good. Will post some pics later on.
Then in other news I made a silly offer for a Sun server thinking I'd never get it, only yo have had my offer accepted.
So now I've got to work out what to do with it. No hard drives but 2 lots of 6 core Xeons. Any suggestions guys?
If it ain't broke, test it to Destruction.
Re: PhilCs blog / the latest things hes broken(fixed)
Thats going to be noisy in the retro room
Re: PhilCs blog / the latest things hes broken(fixed)
@Icky but at least it should heat the area up nicely. And I'll probably re-fan it if I can
If it ain't broke, test it to Destruction.
Re: PhilCs blog / the latest things hes broken(fixed)
Re: PhilCs blog / the latest things hes broken(fixed)
@Steve don't worry, I'll hide it somewhere out of her site, then duct the exhaust down to warm my feet
In reality I need a good clear out.
In reality I need a good clear out.
If it ain't broke, test it to Destruction.
- rubber_jonnie
- Site Admin
- Posts: 10639
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: PhilCs blog / the latest things hes broken(fixed)
Space Heater?
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: PhilCs blog / the latest things hes broken(fixed)
This week I have mostly been in C64 repair mode.
I had 5 C64 motherboards, 3 had had their SID chips amputated unfortunately. I had two of the bread bin style boards and three of the newer C64C boards which had had their SIDS removed.
The two older boards both came with the older 12v MOS 6581, one rev 3 and a rev 1.
I managed to get the three newer boards to boot up and work over the last couple of days and had been thinking about transplanting the old SID chips into two of these boards.
There are quite a number of differences between the two types of C64 motherboard, including the newer 8580 SID chip which runs at 9v instead of 12v. To actually get the 6581 chips to work in a C64C board requires the replacement of a zener diode from the 9v variety to the 12v equivalent. Then because the two SID chips have slightly different sound characteristics, four ceramic caps needed to be replaced as they act as low and high pass filters.( I'll post the procedure tomorrow in its own topic for others that may want to try this)
The good news is that the Rev3 SID is all up and running and sounds great, the bad news is the rev 1 won't pass a diagnostic test and causes all sorts of ram and rom test issues. I think that one is dead.
So i've popped a couple of SwinSids into the other two C64C boards and they seem to be working nicely. In fact I've recapped one of the boards and will put it in the for sale section for around £60 if anyone is interested.
The SwinSid boards are actually pretty good considering it's an Atmel chip pretending to be a SID from the mid 1980s but aren't quite 100% when it comes to replicating the original C64 sound. Generally they miss out some of the pops and buzzes that the original make to generate some of the cool C64 music that we all know and love BUT since buying an original SID these days can cost in excess of £40 I think they do the job pretty damp good.
If I knew anything about YouTube I'd put up a couple of comparisons.
So I shall be keeping one original SID machine and SwinSid machine in the collection whilst I hunt down that elusive second SID chip at a reasonable price. Then I think I'll get a bit nostalgic and relive some of my teenage years and might even have a go at creating a few new tunes.
BTW, fave song so far is the Sanxion loading music by Rob Howard.
Here's the board I'll put up for sale.
I had 5 C64 motherboards, 3 had had their SID chips amputated unfortunately. I had two of the bread bin style boards and three of the newer C64C boards which had had their SIDS removed.
The two older boards both came with the older 12v MOS 6581, one rev 3 and a rev 1.
I managed to get the three newer boards to boot up and work over the last couple of days and had been thinking about transplanting the old SID chips into two of these boards.
There are quite a number of differences between the two types of C64 motherboard, including the newer 8580 SID chip which runs at 9v instead of 12v. To actually get the 6581 chips to work in a C64C board requires the replacement of a zener diode from the 9v variety to the 12v equivalent. Then because the two SID chips have slightly different sound characteristics, four ceramic caps needed to be replaced as they act as low and high pass filters.( I'll post the procedure tomorrow in its own topic for others that may want to try this)
The good news is that the Rev3 SID is all up and running and sounds great, the bad news is the rev 1 won't pass a diagnostic test and causes all sorts of ram and rom test issues. I think that one is dead.
So i've popped a couple of SwinSids into the other two C64C boards and they seem to be working nicely. In fact I've recapped one of the boards and will put it in the for sale section for around £60 if anyone is interested.
The SwinSid boards are actually pretty good considering it's an Atmel chip pretending to be a SID from the mid 1980s but aren't quite 100% when it comes to replicating the original C64 sound. Generally they miss out some of the pops and buzzes that the original make to generate some of the cool C64 music that we all know and love BUT since buying an original SID these days can cost in excess of £40 I think they do the job pretty damp good.
If I knew anything about YouTube I'd put up a couple of comparisons.
So I shall be keeping one original SID machine and SwinSid machine in the collection whilst I hunt down that elusive second SID chip at a reasonable price. Then I think I'll get a bit nostalgic and relive some of my teenage years and might even have a go at creating a few new tunes.
BTW, fave song so far is the Sanxion loading music by Rob Howard.
Here's the board I'll put up for sale.
If it ain't broke, test it to Destruction.