Falcon bodge wire problem, where to connect.
Falcon bodge wire problem, where to connect.
Have recapped my Falcon and a cap, 47 uf @16 volts connected at its positive end to U23, an SMD dip 8. Problem is what pin does that bodge wire connect to? It came loose and I can't find the pin to connect the bodge wire to. Thanks!
Re: Falcon bodge wire problem, where to connect.
Maybe post a image may help as I have no idea what bodge wire your referring to.. I don't recall falcons having any bodge wires even.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: Falcon bodge wire problem, where to connect.
If you check in the motherboard photo forum you'll find some Clab Falcon threads I made which had some bodge wires around the SCSI area, I made some high quality close up shots.