From simple AZERTY Falcon project to custom ARM bus master - advice needed please
Re: From simple AZERTY Falcon project to custom ARM bus master - advice needed please
Without the cap it boots and runs fine at 25MHz as well as 16MHz...
Re: From simple AZERTY Falcon project to custom ARM bus master - advice needed please
Next step: FPU.
FPU 68882 bombs in most apps at 50MHz. If I connect it to the bus clock then it seems to work reliably. I'm curious why it'd bomb at the higher speed, though perhaps its not that important since I really only got it 'because its there'. Still, I kind of want to try to work it out...
FPU 68882 bombs in most apps at 50MHz. If I connect it to the bus clock then it seems to work reliably. I'm curious why it'd bomb at the higher speed, though perhaps its not that important since I really only got it 'because its there'. Still, I kind of want to try to work it out...
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: From simple AZERTY Falcon project to custom ARM bus master - advice needed please
These days i think this is a pretty daft idea. FPGAs cant really go fast enough to be worth it. I'm increasingly of the opinion that something like an 060 version of Buffee or PiStorm is the future.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."