This probably isnt the best place for it, but maybe just to gauge the interest...
So as some of you may already know, I have a Mitsubishi MegaView XC-3720SS RGB analogue/digital CRT monitor.
A Godzilla of a monitor:
Unfortunately, the monitor had a fault, where the picture went weird (which is where I picked it up) and has since not powered on at all (so I'm guessing the power board caps have gone).
So definitely a project.
However, there is a burnt component on one of the boards, which looks like a suitable starting point for fault finding the display fault too and most of the through hole components seem to be fairly regular (not any custom ICs as far as I can tell) so maybe not too bad a project?
I have no intention of touching this internally and was going to pay for a CRT expert who knew a friend to diagnose and possibly repair. However, I'm slowly running out of both room and enthusiasm, so am looking to see if there's any interest for this monitor.
I guess the arcade machine tube hunters would salvage this, but it would be a shame not to restore the girl to her former glory and send her to a good home.
(Arrows in photos show location of burnt component).
Any interested parties can PM me or leave a comment here.
Thanks for looking.
37 Inch CRT monitor restoration...any interest?
- mrbombermillzy
- Posts: 1468
- Joined: Sun Jun 03, 2018 7:37 pm
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: 37 Inch CRT monitor restoration...any interest?
Wow, that's a monster !
- rubber_jonnie
- Site Admin
- Posts: 10623
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: 37 Inch CRT monitor restoration...any interest?
Wow that neck board is HUUUUUUGE!!
I'd personally love to see this restored.
I'd personally love to see this restored.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
- mrbombermillzy
- Posts: 1468
- Joined: Sun Jun 03, 2018 7:37 pm
Re: 37 Inch CRT monitor restoration...any interest?
Forgot to mention... for some reason, the previous owner decided to paint the front bezel in black paint (!) The scratches on the front bezel are just down to the original grey colour finish (like the back) which, I think can be fairly easily restored by basically peeling/chipping the black stuff off.
Re: 37 Inch CRT monitor restoration...any interest?
It's one of those things where somewhere like RMC might like it but it's probably beyond most users collection?
I've got too many 28" CRTs as it is
I'd love to see it restored. If there is willingness but no equipment/funds depending on location I can pop over and bring a few things for the afternoon (discharge wand, scope, dmm, solder station etc). CRTs are not my area of expertise but we could get a few guys on the phone.
I've got too many 28" CRTs as it is
I'd love to see it restored. If there is willingness but no equipment/funds depending on location I can pop over and bring a few things for the afternoon (discharge wand, scope, dmm, solder station etc). CRTs are not my area of expertise but we could get a few guys on the phone.
Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
- mrbombermillzy
- Posts: 1468
- Joined: Sun Jun 03, 2018 7:37 pm
Re: 37 Inch CRT monitor restoration...any interest?
Thanks for the enthusiasm @alexh.
Other than all the other retro guff, I currently have six CRTs (only two are smaller than 21"+) so I really do need to cut down.
I did try starting a CRT repair contacts database here, as I have no expertise, but apparently there was no interest.
There can't be that many tubes left of this size, so I'm sure someone will take the challenge.
Out of interest, where are you based anyway?
Other than all the other retro guff, I currently have six CRTs (only two are smaller than 21"+) so I really do need to cut down.
I did try starting a CRT repair contacts database here, as I have no expertise, but apparently there was no interest.
There can't be that many tubes left of this size, so I'm sure someone will take the challenge.
Out of interest, where are you based anyway?
Re: 37 Inch CRT monitor restoration...any interest?
Oxford
Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV