Voltera printer - the beginning..

Tool suggestions, soldering tips, general useful electronics knowhow.
User avatar
exxos
Site Admin
Site Admin
Posts: 23494
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Voltera printer - the beginning..

Post by exxos »

I had been puzzling over something for a while.. In that I was constantly having to adjust the print height to a higher and higher value. Turns out as the cog turns it actually acknowledges the cartridge downwards making the nozzle closer to the PCB.. Which was why I was constantly having to set a higher height. So I added some spacers as marked in yellow to stop the cartridge from shifting position while it is printing..

The problem being that the more it printed the more it moved downwards and the less paste it of applied on later pads..

IMG_6625.JPG
IMG_6625.JPG (238.69 KiB) Viewed 1342 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “ELECTRONICS”