HW free Overscan on the GEM desktop possible!

General Discussion, STOS.

Moderator: troed

User avatar
mrbombermillzy
Posts: 1441
Joined: Sun Jun 03, 2018 7:37 pm

Re: HW free Overscan on the GEM desktop possible!

Post by mrbombermillzy »

@czietz Thanks for the visualisation. I see it's not very practical. Such a shame! :(

However, I did have a little play with the low/med res program out of curiosity (seeing as I had the right TOS version, if not language).

You can see, the desktop in ST LOW goes right to the bottom of my 1084:

P1040339.JPG
P1040339.JPG (135.72 KiB) Viewed 1025 times

As I cant adjust the V.Size, I have rolled the image to show the bottom border: (slight blur due to a slow roll, but that looks like ~5-10px!)

P1040340.JPG
P1040340.JPG (160.54 KiB) Viewed 1025 times

And here is ST MED:

P1040341.JPG
P1040341.JPG (150.23 KiB) Viewed 1025 times

Unfortunately, after the first run, the desktop reverted back to having a border (although the trash bin was still hidden in the bottom border?) so, I didn't snap any apps running. Perhaps some sort of internal configuration was written after the initial run which stopped the overscan?

Will have another look again if I can figure out the problem. Perhaps this brief boot message has something to do with it? Or maybe it needs the German 1.0/1.2 TOS to work reliably? (Although I believe that the German TOS requirement just affects the mouse positioning on the bottom of the screen being patched correctly AFAICT).

P1040342.JPG
P1040342.JPG (113.17 KiB) Viewed 1025 times

EDIT: I'm never 100% sure STFM tricks are going to work on the slightly different clock of a Mega. Seems to be fine so far though (initially anyhow).
Post Reply

Return to “SOFTWARE”