STFM case remake
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: STFM case remake
awesome work
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: STFM case remake
Thanks @terriblefire it's slow going but once done we will be able to re-house some naked STs out there
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STFM case remake
I love that shocking pink colour...
Re: STFM case remake
It was for @exxos originally but it actually helps to see where certain issues are as it’s bright.
I prefer the dark grey the first case prototype that was glued together in sections was printed in but I have a deep purple ready for the next prototype print.
Problem is at the moment my printer is at my parents whilst I am in the midst of moving house.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STFM case remake
No matter the colour is, you have done a great job !
Re: STFM case remake
Looks grand, Icky!
BW
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: STFM case remake
Thanks both.
Whilst in limbo during the house move thought I would work on the STE joystick ports. Draft ports in place (will eventually need to print out a prototype section to check fit) and now looking at how to incorporate a face place to cover the ports if using as an STFM case. Once this is complete all I then need to do is the STE rear panel and then case bottom is complete for STFM and STE.
Re: STFM case remake
Nice!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STFM case remake
Looks good to me.
I always wondered about using those for other purposes as well,maybe USB etc
I always wondered about using those for other purposes as well,maybe USB etc
If it ain't broke, test it to Destruction.
Re: STFM case remake
With the back panel now removable we can add slots for all sorts. e.g. USB, SD or CF card slot etc. However to your point @PhilC I just created the initial panel for the STE joystick ports and I can see we could have a few versions such as a USB port panel. Options are endless almost
Render has panel in a different colour to show where it is.
EDIT: Clips in place on panel