Trusted CPU Suppliers Or Ones To Avoid

Help & news on accelerators from TF, Amiga, Atari, CD32 etc

Moderators: terriblefire, Terriblefire Moderator

go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: Trusted CPU Suppliers Or Ones To Avoid

Post by go0se »

8 Bit Dreams wrote: Thu Jun 27, 2019 10:05 pm Yeah..just need to add that graphical glitches ive reported previously seems to be produced by CPU's im using.
Have about 20x 33Mhz chips that don't want to run @50Mhz or are partially working...
will need to go at lower speed on TF536 to be able to deliver stable cards.. :x
I have had similar results when running 33Mhz labelled CPUs at 50Mhz on the 330. It might be better to use those on a less demanding card.

Do the same CPUs run without issue on ~33Mhz clocked 530/534s? as I think I'm right in thinking that TF has stated, as with the 330 only 50Mhz will be supported on the 536?
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Trusted CPU Suppliers Or Ones To Avoid

Post by 8 Bit Dreams »

go0se wrote: Wed Jul 03, 2019 11:36 am I have had similar results when running 33Mhz labelled CPUs at 50Mhz on the 330. It might be better to use those on a less demanding card.

Do the same CPUs run without issue on ~33Mhz clocked 530/534s? as I think I'm right in thinking that TF has stated, as with the 330 only 50Mhz will be supported on the 536?
Well, to be fair - i haven't tried other frequencies than 50Mhz till now, TF534 allows that, but TF330's not,
building three new TF534 cards, will try to put 40Mhz oscillator on it and see how these CPUs work..
Retro computer hardware & repair in Germany
xraynorm
Posts: 8
Joined: Fri Aug 16, 2019 9:06 am

Re: Trusted CPU Suppliers Or Ones To Avoid

Post by xraynorm »

Hi guys.

It was mentioned on one of the TF videos that John "Chucky" Hertell is selling 060 cpus.

Does he have an email address?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Trusted CPU Suppliers Or Ones To Avoid

Post by terriblefire »

Message ChuckyGang user on this forum.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “Terriblefire's channel”