A500+ Rev 8A.1

[maeltar]

Hi all,

I have an A500+ with a Rev 8A.1 Motherboard, and have taken my time ( too much ) fixing battery damage, The CAP C12 didn't make it, and I can't remember what it ism looking at amigapcb.org shows as a 10uF , now can I use a standard ceramic cap, or does it need to be "mlcc" ??

IMG_20190715_152443.jpg (457.59 KiB) Viewed 3555 times

Also need to find a supplier of 74LS244 as managed to order some ages ago and they are now lost in the depths of my cave !

IMG_20190715_092855.jpg (455.09 KiB) Viewed 3555 times

I have re-capped it, is there anything else I should replace while I'm in there ?

Thanks
Simon

[Justme14]

Hi,

Looking good.
Cap C12 = 10nF (nanofarad) and is the same as C10.

But you should be good to post it with out c12.

[maeltar]

Hi,

Looking good.
Cap C12 = 10nF (nanofarad) and is the same as C10.

But you should be good to post it with out c12.

Thanks very much

Good to know I would get away without it as well