Module ESP8266 without TF on Amiga
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
set bitrate 38400
save
reset
save
reset
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin
Then
After reset is still freeze CMD>reset
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin
Code: Select all
telnet 192.168.240.1 7777
Code: Select all
set bitrate 38400
Code: Select all
save
Code: Select all
reset
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
You are all set. Plug it into the amiga and use my script.kulamario wrote: ↑Fri Apr 17, 2020 5:16 pm I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write aginThenCode: Select all
telnet 192.168.240.1 7777
Code: Select all
set bitrate 38400
Code: Select all
save
After reset is still freeze CMD>resetCode: Select all
reset
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
This script how to start ?
Just double click and then enter , enter ... ?
Just double click and then enter , enter ... ?
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
type execute install_script
Check that the version is the one with the baud rate of 38400.. the one i posted on this forum has that baud rate.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
Just power off and on the ESP after reset. Should make it work.
Re: Module ESP8266 without TF on Amiga
How to check this ?
Install your script
I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off
I disconnect esp8266 from laptop and connect to amigaCheck that the version is the one with the baud rate of 38400..
Install your script
I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
start with ping 192.168.240.1 at a cli after a reboot.kulamario wrote: ↑Fri Apr 17, 2020 5:45 pm How to check this ?I disconnect esp8266 from laptop and connect to amigaCheck that the version is the one with the baud rate of 38400..
Install your script
I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Module ESP8266 without TF on Amiga
No working
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Module ESP8266 without TF on Amiga
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."