ReAgnus Board (Design Complete)
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: ReAgnus Board (Design Complete)
ReAgnus is an Agnus replacement and doesn’t have any RAM.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: ReAgnus Board (Design Complete)
What is future of this project?
- arkadiusz.makarenko
- Moderator Team
- Posts: 1208
- Joined: Wed Jun 19, 2019 7:36 am
- Location: Edinburgh
Re: ReAgnus Board (Design Complete)
I think this quote is quite accurate
MontyPython wrote: E's not pinin'! 'E's passed on! This parrot is no more! He has ceased to be! 'E's expired and gone to meet 'is maker! 'E's a stiff! Bereft of life, 'e rests in peace! If you hadn't nailed 'im to the perch 'e'd be pushing up the daisies! 'Is metabolic processes are now 'istory! 'E's off the twig! 'E's kicked the bucket, 'e's shuffled off 'is mortal coil, run down the curtain and joined the bleedin' choir invisible!! THIS IS AN EX-PARROT!!
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: ReAgnus Board (Design Complete)
rm -rf *
Same as all the tf projects.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: ReAgnus Board (Design Complete)
I appreciate that all TF projects are closed but I thought this might be interesting to anyone looking into this again.
Over the last few weeks (probably longer) some Commodore technical documentation has surfaced about the internals of some of the Amiga chips. They may have been available longer but I'd never seen them before. There are Agnus documents with a lot of detail I've never seen before including timing diagrams, state diagrams, even gate array schematics of the original OCS agnus.
https://github.com/nonarkitten/amiga_re ... ster/agnus
Enjoy
Over the last few weeks (probably longer) some Commodore technical documentation has surfaced about the internals of some of the Amiga chips. They may have been available longer but I'd never seen them before. There are Agnus documents with a lot of detail I've never seen before including timing diagrams, state diagrams, even gate array schematics of the original OCS agnus.
https://github.com/nonarkitten/amiga_re ... ster/agnus
Enjoy
Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Re: ReAgnus Board (Design Complete)
Real interesting. I hope this will go on.
-
- Moderator Team
- Posts: 5368
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: ReAgnus Board (Design Complete)
I'm aware of all the documentation and i've had all these since before I started this. I'm not going to look at this project again. I have too many other things happening in my life.alexh wrote: ↑Sun Dec 06, 2020 2:20 pm I appreciate that all TF projects are closed but I thought this might be interesting to anyone looking into this again.
Over the last few weeks (probably longer) some Commodore technical documentation has surfaced about the internals of some of the Amiga chips.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: ReAgnus Board (Design Complete)
Necrobump.
A few days ago the Kipper2k announced a project in conjunction with the Buffee team which included "Willoe" a direct replacement for 8375 Agnus (1MB, 2MB) and Alice.
https://github.com/nonarkitten/amiga_re ... -(ReAgnus)
I noticed this could be an evolution of "ReAgnus as developed by Stephen Leary"? It is included "for reference". If you had any part then thanks as I just can't get 8375 2MB PAL Agnii for anything.
A few days ago the Kipper2k announced a project in conjunction with the Buffee team which included "Willoe" a direct replacement for 8375 Agnus (1MB, 2MB) and Alice.
https://github.com/nonarkitten/amiga_re ... -(ReAgnus)
I noticed this could be an evolution of "ReAgnus as developed by Stephen Leary"? It is included "for reference". If you had any part then thanks as I just can't get 8375 2MB PAL Agnii for anything.
Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: ReAgnus Board (Design Complete)
A picture is better than thousand words:
Retro computer hardware & repair in Germany
- mrbombermillzy
- Posts: 1441
- Joined: Sun Jun 03, 2018 7:37 pm
Re: ReAgnus Board (Design Complete)
Cool. I will have to check that this will fit my A500+.