rev3 tf530 - is 10k fine for rn1 - rn3?

TF530 - 63030 + RAM Board

Moderators: terriblefire, Terriblefire Moderator

Post Reply
oggie
Posts: 46
Joined: Fri Oct 11, 2019 12:21 am

rev3 tf530 - is 10k fine for rn1 - rn3?

Post by oggie »

So I finally got around to building my tf530, and noticed I have a delta between the parts I ordered, and what's listed on the github page.

I bought 10K resistor networks for rn1-rn3, but it's listed as 1K on github. I See it was changed from 10k to 1k on dec 31, 2017. I must have ordered the parts just before it was changed?

Anyway, is it safe to use the 10k ones I bought?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: rev3 tf530 - is 10k fine for rn1 - rn3?

Post by terriblefire »

oggie wrote: Fri Oct 11, 2019 12:25 am So I finally got around to building my tf530, and noticed I have a delta between the parts I ordered, and what's listed on the github page.

I bought 10K resistor networks for rn1-rn3, but it's listed as 1K on github. I See it was changed from 10k to 1k on dec 31, 2017. I must have ordered the parts just before it was changed?

Anyway, is it safe to use the 10k ones I bought?
Its safe but it probably wont work past 25Mhz.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
oggie
Posts: 46
Joined: Fri Oct 11, 2019 12:21 am

Re: rev3 tf530 - is 10k fine for rn1 - rn3?

Post by oggie »

oh. bummer. I have a 33MHz cpu.
Post Reply

Return to “TF530”