Finally going to build this board

TF530 - 63030 + RAM Board

Moderators: terriblefire, Terriblefire Moderator

Post Reply
Dallyis
Posts: 18
Joined: Tue Jun 02, 2020 11:01 pm

Finally going to build this board

Post by Dallyis »

Before I build the TF536 I am going to build a TF530.

I have most of the parts, I also have incorrect cpld XC9536XL10VQG44C.
I looked on RS and the correct ones are not stocked.
Where is the best place to purchase these at a reasonable price or if anyone has any left over that I could buy from them.
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: Fibnall going to build this board

Post by DoG »

Farnell, Mouser, DigiKey all have them in stock.

EDIT: Sorry. Searched for the part you listed above...

EDIT2: ...but the right part is also in stock when searched.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: Fibnall going to build this board

Post by 8 Bit Dreams »

Retro computer hardware & repair in Germany
Dallyis
Posts: 18
Joined: Tue Jun 02, 2020 11:01 pm

Re: Fibnall going to build this board

Post by Dallyis »


Thanks @DoG and @8 Bit Dreams
I had searched digi-key, but for such a small order the cost of delivery and service/vat charge by ups or fed ex is crazy.
I was hoping I could get them somewhere in the EU.
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: Finally going to build this board

Post by PhilC »

Have you tried uk.farnell.com ?
If it ain't broke, test it to Destruction.
Dallyis
Posts: 18
Joined: Tue Jun 02, 2020 11:01 pm

Re: Finally going to build this board

Post by Dallyis »

PhilC wrote: Sun Jun 28, 2020 10:18 pm Have you tried uk.farnell.com ?
Checked Farnell IE earlier and could not find them there, but stock does show on the uk site and when I rechecked the IE site I found them so ordered now,

Thanks Phil
Dallyis
Posts: 18
Joined: Tue Jun 02, 2020 11:01 pm

Re: Finally going to build this board

Post by Dallyis »

Built the TF536 first very happy with it.

Now back to the TF530 I looked at the recommended ram for this build and it appears to be very expensive.

I have Alliance AS7C4096B-12T7CN I supose these will not be compatible?

Does anyone have extra ram they are noT using that I could purchase for a resonable price with post to Ireland?

Regards
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Finally going to build this board

Post by terriblefire »

I have not tried the alliance myself but they should work. If 5V.

This is the trouble with waiting to build designs. Prices of parts soar
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Dallyis
Posts: 18
Joined: Tue Jun 02, 2020 11:01 pm

Re: Finally going to build this board

Post by Dallyis »

Thanks I might try them first.

I bought the board from you about two yeasrs ago now but I was working away from home until recently so only getting round to building it now.

The TF536 is excellent thanks.
Post Reply

Return to “TF530”