TF534 on A1000

TF534 - 68030 + More RAM Board (More compatible with amiga hardware)

Moderators: terriblefire, Terriblefire Moderator

EzdineG
Posts: 65
Joined: Mon Nov 12, 2018 5:19 pm

TF534 on A1000

Post by EzdineG »

TF534 on A1000
Motherboard Rev: ? w/ daughterboard
CPU: 030 @ 40mhz
FPU: Yes
Fit with Relocator: Yes
Relocator: EzdineG (gerbers here)
AmigaOS: 3.1.4 w/ bestwb 1.1; also 3.1 / classicwb

This post is confirmation that the TF534 works correctly with the Amiga 1000. Tested thoroughly for weeks now using the relocator above. Machine would not post with Kickstart 1.3, possibly due to RAM autoconfig, but works fine >= 3.1.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF534 on A1000

Post by 8 Bit Dreams »

Thanks for this update,
right, will not work under 1.3 for two reasons:
1. Zorro lll isn't working under KS 1.3
2. No scsi.device in rom
Retro computer hardware & repair in Germany
User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF534 on A1000

Post by kulamario »

Have question about Amiga 1000 and TF534
If I swap kick for 3.1 TF534 I'll be working on A1000 without any mods ?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF534 on A1000

Post by terriblefire »

8 Bit Dreams wrote: Sun Jul 07, 2019 1:44 am Thanks for this update,
right, will not work under 1.3 for two reasons:
1. Zorro lll isn't working under KS 1.3
2. No scsi.device in rom
Yeah it should still post... just no ram or ide drive..

@EzdineG was the kick1.3 soft kicked? I think the soft kick bootstrapper has incompatibilities with 030 cpu?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
EzdineG
Posts: 65
Joined: Mon Nov 12, 2018 5:19 pm

Re: TF534 on A1000

Post by EzdineG »

terriblefire wrote: Sun Jun 28, 2020 9:51 pm Yeah it should still post... just no ram or ide drive..

@EzdineG was the kick1.3 soft kicked? I think the soft kick bootstrapper has incompatibilities with 030 cpu?
No, this was using the hardware mod allowing the use of a physical ROM. 1.3 would get stuck after the first color change before the workbench hand appeared.

Without the mod, both TF530/534 would crash at the bootstrapper as you describe above.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF534 on A1000

Post by terriblefire »

EzdineG wrote: Sun Jun 28, 2020 11:17 pm
terriblefire wrote: Sun Jun 28, 2020 9:51 pm Yeah it should still post... just no ram or ide drive..

@EzdineG was the kick1.3 soft kicked? I think the soft kick bootstrapper has incompatibilities with 030 cpu?
No, this was using the hardware mod allowing the use of a physical ROM. 1.3 would get stuck after the first color change before the workbench hand appeared.

Without the mod, both TF530/534 would crash at the bootstrapper as you describe above.
Is that an A1000 specific 1.3? If so i'd try an A500 one just for a laugh.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
EzdineG
Posts: 65
Joined: Mon Nov 12, 2018 5:19 pm

Re: TF534 on A1000

Post by EzdineG »

It was the A500/2000 common 1.3.

That said...

It is possible I was attempting to boot with a version that had the scsi.device hacked in, because I did have that setup booting with the TF530’s IDE.

If you need confirmation, I can try it with a 1.3 masked ROM.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF534 on A1000

Post by terriblefire »

EzdineG wrote: Sun Jun 28, 2020 11:25 pm It was the A500/2000 common 1.3.

That said...

It is possible I was attempting to boot with a version that had the scsi.device hacked in, because I did have that setup booting with the TF530’s IDE.

If you need confirmation, I can try it with a 1.3 masked ROM.
Its just useful to know if that rom will boot with 030.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
EzdineG
Posts: 65
Joined: Mon Nov 12, 2018 5:19 pm

Re: TF534 on A1000

Post by EzdineG »

terriblefire wrote: Sun Jun 28, 2020 11:29 pm
EzdineG wrote: Sun Jun 28, 2020 11:25 pm It was the A500/2000 common 1.3.

That said...

It is possible I was attempting to boot with a version that had the scsi.device hacked in, because I did have that setup booting with the TF530’s IDE.

If you need confirmation, I can try it with a 1.3 masked ROM.
Its just useful to know if that rom will boot with 030.
I can confirm it does.

Before the 534, I used 1.3 on the 1000 with the TF530 just fine (even got IDE to work later with the hacked scsi.device ROM.)
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF534 on A1000

Post by terriblefire »

EzdineG wrote: Sun Jun 28, 2020 11:32 pm
terriblefire wrote: Sun Jun 28, 2020 11:29 pm

Its just useful to know if that rom will boot with 030.
I can confirm it does.

Before the 534, I used 1.3 on the 1000 with the TF530 just fine (even got IDE to work later with the hacked scsi.device ROM.)
Ok good to know. I have one of your ROM boards built for my A1000 but its actually sitting in my H4 at the moment.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF534 (OBSOLETE)”