The card works fine. It operates at a frequency of 33-50 MHz without FPU.
Failed to boot from FPU: x yellow screen
Now for permanent mounting on the ATARI 520ST.
What (* .jed) CPLD batch for ATARI?
TF534 Not run
Moderators: terriblefire, Terriblefire Moderator
- 8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF534 Not run
grab @agranlund's FW, it works for sure
Retro computer hardware & repair in Germany
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF534 Not run
Bad FPU then.. or one that cant go fast enough.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF534 Not run
Don't run it at 50. The alliance 55ns ram can't cope with it. You should not go above 40.
Re: TF534 Not run
If you want ram to run reliably at 50MHz, use: CY62158ELL-45ZSX
https://www.reichelt.de/sram-8-mb-1-m-x ... 46557.html
https://www.reichelt.de/sram-8-mb-1-m-x ... 46557.html
Re: TF534 Not run
@terriblefire @alenppc
i changed the oscillator to 33mhz. FPU has started and runs stably. Tests done with Amiga 500. THX
@8 Bit Dreams
I have uploaded the files from @agranlund
Atari starts up. But Ultrasatan doesn't work with TOS 2.06. Atari hangs when starting reading the SD card.
Card without FPU
Try EMUTOS by @ agranlund today
i changed the oscillator to 33mhz. FPU has started and runs stably. Tests done with Amiga 500. THX
@8 Bit Dreams
I have uploaded the files from @agranlund
Atari starts up. But Ultrasatan doesn't work with TOS 2.06. Atari hangs when starting reading the SD card.
Card without FPU
Try EMUTOS by @ agranlund today