RAM - IS41C16100C

TF328 - RAM + IDE CD32 Board

Moderators: terriblefire, Terriblefire Moderator

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: RAM - IS41C16100C

Post by 8 Bit Dreams »

Noticed that power & GND header for external programming are missing, wanted to add them, and noticed that brd file isn't routed...what a mess
Retro computer hardware & repair in Germany
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: RAM - IS41C16100C

Post by arkadiusz.makarenko »

I have noticed this. I think it is even recorded as issue on bug tracker.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: RAM - IS41C16100C

Post by terriblefire »

You know someone already ported the TF328 card for the A1200 with RTC and SPI?

EDIT: Actually there are at LEAST 2 ports to the 1200 of the TF328. Both are open source.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: RAM - IS41C16100C

Post by 8 Bit Dreams »

about 8MB expansions - don't know will there be much interest, just wanted to build one for my personal use, all i was able to find - was Edu's board..

As about a1200 connectors - im fully agree with Alen, collective purchase is the right choice, im in if this will be done, can take 200 - 300 pieces
Retro computer hardware & repair in Germany
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: RAM - IS41C16100C

Post by terriblefire »

8 Bit Dreams wrote: Tue Nov 05, 2019 4:08 pm about 8MB expansions - don't know will there be much interest, just wanted to build one for my personal use, all i was able to find - was Edu's board..
Kipper2k released the K1208 open source. The eagle files etc are linked somewhere on eab.

EDIT: www.kipper2k.com/tfpics/tf1200.zip
tf1200.zip
(83.2 KiB) Downloaded 240 times
As about a1200 connectors - im fully agree with Alen, collective purchase is the right choice, im in if this will be done, can take 200 - 300 pieces
What is the unit cost on these? I'm considering doing a similar thing with these connectors as i did with the A3000 ones. Only downside is i'd need to charge VAT on each unit.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: RAM - IS41C16100C

Post by arkadiusz.makarenko »

terriblefire wrote: Tue Nov 05, 2019 4:33 pm
Kipper2k released the K1208 open source. The eagle files etc are linked somewhere on eab.

EDIT: www.kipper2k.com/tfpics/tf1200.zip
Great. I did look for those, but couldn't find it. I assumed that only firmware was released.

Ps
Do you know if any TF330 ports to A1200 by any chance?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: RAM - IS41C16100C

Post by terriblefire »

arkadiusz.makarenko wrote: Tue Nov 05, 2019 5:21 pm Do you know if any TF330 ports to A1200 by any chance?
Edu Arana has a TF330 port but he's had issues with it for some reason. I'll probably do the port myself if he doesnt get it working.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: RAM - IS41C16100C

Post by go0se »

alenppc wrote: Tue Nov 05, 2019 4:44 pm According to the last quote, it was 1.58 USD a piece per 1000 pieces min. If we pool the resources I can even do the purchase and distribute the connectors accordingly since my import fees will likely be the lowest (15%).
I can take ~200 if you're doing a bulk purchase from China. Sounds like there's enough interest here to make this happen.
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: RAM - IS41C16100C

Post by alenppc »

go0se wrote: Tue Nov 05, 2019 5:55 pm
alenppc wrote: Tue Nov 05, 2019 4:44 pm According to the last quote, it was 1.58 USD a piece per 1000 pieces min. If we pool the resources I can even do the purchase and distribute the connectors accordingly since my import fees will likely be the lowest (15%).
I can take ~200 if you're doing a bulk purchase from China. Sounds like there's enough interest here to make this happen.
Ok, I sent them an email... if all goes well I can order them and then we can split them. I can ship them with low value via UPS so that nobody gets additional charges.
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: RAM - IS41C16100C

Post by go0se »

terriblefire wrote: Tue Nov 05, 2019 4:33 pm
Kipper2k released the K1208 open source. The eagle files etc are linked somewhere on eab.

EDIT: www.kipper2k.com/tfpics/tf1200.zip

tf1200.zip
For anyone interested in these just be aware that the Kipper2k board uses a straddle mount PCI type connector rather than the 150 position through hole connector on the Edu Arana version.
Post Reply

Return to “TF328 (OBSOLETE)”