330 disable function bug

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: 330 disable function bug

Post by terriblefire »

Try this one... i cant even test these right now so go careful.
tf330_2019_05_25_alpha.zip
(23.75 KiB) Downloaded 260 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
supaduper
Posts: 561
Joined: Thu Nov 08, 2018 12:05 pm

Re: 330 disable function bug

Post by supaduper »

Hi Steve, that JED file will not program , comes up with file error when trying to program with x3sprog
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: 330 disable function bug

Post by alenppc »

I was able to program this one... it seems to be working even without the hw fix. I'll leave it on for a while, let's see if it holds.
User avatar
supaduper
Posts: 561
Joined: Thu Nov 08, 2018 12:05 pm

Re: 330 disable function bug

Post by supaduper »

Ok mine must have been a corrupt download. will try it again tomorrow
dalek
Posts: 224
Joined: Thu Nov 08, 2018 11:03 am
Location: NSW Australia

Re: 330 disable function bug

Post by dalek »

tf330_2019_05_25_alpha.zip disable now working here too.

Anecdotally I found out about this the hard way. Only just built my card last night and was trying to figure out why it wouldn't run. Turns out that 'Disable' on the silkscreen means you need a jumper _removed_ to disable the card - maybe it could be called 'Enable' on future cards? Also the direction of the jumpers on the silkscreens is counter intuitive to me - I initially had it across the wrong pins! I should have double checked the obv file.

For anyone else building these also remember that power header silkscreen is wrong too, at least on rev 3 :)

Super happy with my card now, thanks for all your work once again Stephen!
User avatar
supaduper
Posts: 561
Joined: Thu Nov 08, 2018 12:05 pm

Re: 330 disable function bug

Post by supaduper »

So it was a bad download I managed to program the TF330 with the above jed and the CD drive does not boot at all with a CD rom in it, it just goes to the Cd32 splash screen...is this the same for you Allen ?
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: 330 disable function bug

Post by terriblefire »

Ok seems like mixed results.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
dalek
Posts: 224
Joined: Thu Nov 08, 2018 11:03 am
Location: NSW Australia

Re: 330 disable function bug

Post by dalek »

Actually my bad - I didn't have the CD drive plugged in. Same results - no jumper no CD boot (and no devices in the early boot menu) - just sits at the splash screen.
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: 330 disable function bug

Post by go0se »

Same results here as dalek and supaduper, splash screen and no CD action.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: 330 disable function bug

Post by 8 Bit Dreams »

New FW doesn't work on client's setup unfortunately. Sorry for bad news.. :|
Retro computer hardware & repair in Germany
Post Reply

Return to “TF330”