exxos's Atari, Amiga & retro forum

I have now received my order of part built TF1230 BETA boards from JLCPCB (see above) and am offering up the excess for people in the UK who want to build one and contribute to development.

Asking £10 each via PayPal "Friend" including tracked UK postage.

!!Please note!! these boards are for BETA testing, they are not final, might not work with your A1200, and are subject to design change on Terriblefire's whim.

Boards are green, part assembled with immersion gold finish.

Here is one I threw together earlier :

To complete assembly you will require :

100MHz oscillator ( will be included with the board when posted )
SOT-223 LM1117 3.3V regulator ( will be included with the board when posted )

Xilinx XC95144XL TQG144 CPLD
4X SN74CB3T3245PWR level shifters
A PGA128 CPU socket (optional but highly recommended!)
A PGA 68030 CPU able to handle 50MHz ( easier said than done! )
2X TSOPII 54 SDRAM chips - there are a number of options here, but go with whatever Terriblefire recommends.
2.54mm 1X2 male header pins with jumper (optional, a blob of solder will suffice, but convenient)

PCI-RBK-150 150 position board to board connector. These can be found in a few places, I have plenty available, if you want one sent with your board add another £5 to the price to cover the connector and the extra postage.

PM me if you want a board.

Cheers.

Go0se.

Yes please - would love one! Not had chance to order one yet!!!

And LOL @ spelling out BETA there!

Good evening,

I would be ok to test it. I have 3 differents amiga 1200 revs. But I am In France. Would it be possible to send opne if of course I pay the more shipping fees ?

bye

Stephane

Hi,

I would be interested in one thanks. PM sent.
Recent Firmware updates seem to be doing well.

Thanks

PM replied.

I still have some more part-populated 1230 Beta PCBs and 1200 edge connectors available. If you are in the UK and have an exotic A1200 motherboard revision that hasn't been mentioned as tested in the main 1230 thread then get involved!

Hello please put me down for one defo if you still have one available, as would love build one & then test on my 1B.