Not sure if its a good thing or not. But i know what the first 10 word reads (and their addressed) should be on DiagROM and Kickstart from memory... when i see it isnt what i expect its easy to find the issue.GadgetUK164 wrote: ↑Mon Oct 11, 2021 2:26 pm Nicely worked out =D I have seen a couple of 1200's with corrosion around there (strangely) - not sure how it gets there...
Reasons a TF1230 (or any expansion card) may not work
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Reasons a TF1230 (or any expansion card) may not work
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Reasons a TF1230 (or any expansion card) may not work
More robust than you would thinkarkadiusz.makarenko wrote: ↑Mon Oct 11, 2021 7:33 am To be fair, A1200 and A600 PCBs are quite fragile.
So you need some experience to handle them properly.
A pile of boards used to test the TF1230, still have not found time to put them away
Life is really simple, but we insist on making it complicated - Confucius