The TF1260 rev1 arrives!!! Oh boy!

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

Post Reply
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

The TF1260 rev1 arrives!!! Oh boy!

Post by terriblefire »

Here it is
A4F67867-9B88-455C-AFE2-33906D861924.jpeg
A4F67867-9B88-455C-AFE2-33906D861924.jpeg (423.1 KiB) Viewed 7281 times
8FE28A6E-3E1B-402C-A614-136A1128A887.jpeg
8FE28A6E-3E1B-402C-A614-136A1128A887.jpeg (341.23 KiB) Viewed 7281 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Higgy
Posts: 400
Joined: Tue Apr 23, 2019 8:05 pm
Location: Somerset

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by Higgy »

Yummy yummy and caps done by board house - fingers crossed they work out fine.
Love the density of tracks !
What was the situation with voltage reg in the end, is a separate voltage reg board needed or can you just drop in one of 2 types on the PCB?
I thought I might have seen Chucky's Rev 0 with one of those Apollo 1240 conversion voltage regulators fitted.
Justme14
Posts: 39
Joined: Tue Dec 18, 2018 9:28 pm
Location: Netherlands

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by Justme14 »

Really Awesome !

Hope to see these in the next stream in close-up hopefully :D .
theq
Posts: 114
Joined: Tue Dec 18, 2018 7:16 pm
Location: North of the Wall

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by theq »

Really hope this one pans out! :P
Can’t wait to build (if released to the wild). Already sourced ‘060 and socket 8-)

Anyone tried the rev. 0 on the ACA500Plus?
PaulJ_2.0
Posts: 571
Joined: Sat May 11, 2019 11:32 pm

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by PaulJ_2.0 »

That's pretty sweet.
Does it bump the cost of each card up much? I'd happily pay a few ££ extra per card for that time saved.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by terriblefire »

I think it depends on how they’re feeling in China. This time I got a discount and had it done for $1 per board. But that may increase at the whim of the board house.

Overall I’m aiming for £13 per board
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
PaulJ_2.0
Posts: 571
Joined: Sat May 11, 2019 11:32 pm

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by PaulJ_2.0 »

terriblefire wrote: Tue Jan 21, 2020 10:37 pm I think it depends on how they’re feeling in China. This time I got a discount and had it done for $1 per board. But that may increase at the whim of the board house.

Overall I’m aiming for £13 per board
Yeah that's insanely cheap then considering the time involved doing them by hand. Shame they only offer single sided, but I can see why they dont do both.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by terriblefire »

Boards posted out to chucky, supaduper, alenppc and go0se
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
quantum8
Posts: 13
Joined: Tue Apr 23, 2019 7:20 am

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by quantum8 »

Fantastic! Just watching the latest YouTube stream now.

Looks like I'm going to have to keep a close eye on amibay to get my hands on one of these bad boys.
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: The TF1260 rev1 arrives!!! Oh boy!

Post by alenppc »

terriblefire wrote: Wed Jan 22, 2020 8:53 am Boards posted out to chucky, supaduper, alenppc and go0se
Thank you! Looking forward to it!
Post Reply

Return to “TF360”