TF1260 IDE not working with beta firmware

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

Tiggythecat
Posts: 18
Joined: Tue Aug 17, 2021 5:37 pm

TF1260 IDE not working with beta firmware

Post by Tiggythecat »

Hi there, So I was able to update the firmware on my TF1260 using a rpi and it runs great, anyway I wanted to put the ehide.device and tf IDE port to use but no matter what I try it dosnt work!! I either get a guru or a crash to a black screen. Has anybody else experienced this? Does anybody have any ideas on how to get it working? I am using kickstart 3.1.4 and my workbench is on a SD card on the Amigas IDE port. Thank you.
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF1260 IDE not working with beta firmware

Post by arkadiusz.makarenko »

Have you tried with example OS image created by @chucky?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
Tiggythecat
Posts: 18
Joined: Tue Aug 17, 2021 5:37 pm

Re: TF1260 IDE not working with beta firmware

Post by Tiggythecat »

No - where can I get this?
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF1260 IDE not working with beta firmware

Post by alenppc »

Tiggythecat wrote: Sat Sep 25, 2021 7:57 pm No - where can I get this?
Every builder has their own disk image, so you should ask yours.
Tiggythecat
Posts: 18
Joined: Tue Aug 17, 2021 5:37 pm

Re: TF1260 IDE not working with beta firmware

Post by Tiggythecat »

ok well how can i get this working on my OS install?
trixster
Posts: 109
Joined: Fri Mar 22, 2019 3:25 pm

Re: TF1260 IDE not working with beta firmware

Post by trixster »

Tiggythecat wrote: Sat Sep 25, 2021 7:05 pm Hi there, So I was able to update the firmware on my TF1260 using a rpi and it runs great, anyway I wanted to put the ehide.device and tf IDE port to use but no matter what I try it dosnt work!! I either get a guru or a crash to a black screen. Has anybody else experienced this? Does anybody have any ideas on how to get it working? I am using kickstart 3.1.4 and my workbench is on a SD card on the Amigas IDE port. Thank you.
What steps have you tried so far?
Tiggythecat
Posts: 18
Joined: Tue Aug 17, 2021 5:37 pm

Re: TF1260 IDE not working with beta firmware

Post by Tiggythecat »

I tried adding the line C:loadmodule DEVS:ehide.device to the startup sequence, I also tried booting with no startup sequence and typing it in to the prompt, and to rule out my harddisk install I tried making a workbench floppy with the line added to it. as soon as they run and if there is a card in the cf on the tf ide I get a crash if there is no card in the cf adapter it carrys on as normal.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1260 IDE not working with beta firmware

Post by terriblefire »

Its not a crash. Its the OS rebooting with the new module in. Thats expected.
LoadModule MODULE/M,LIST/S,NOREBOOT/S,IGNOREVERIFY/S,NOMEMFKICK/S,
REVERSE/S,HEADERFORWARDS/S,REMOVE/S,AUTO/S,ROMUPDATE/S,
EXECTOCHIP/S,ALLTOCHIP/S,DOWNGRADE/S


MODULE/M: Several file names of resident modules to be made
reset-resident. The file names need not to correspond
to the names of the resident modules, though.
"LoadModule" will figure out the correct names itself.
The module names can also be specified by wildcards
which will be resolved by LoadModule automatically.

LIST/S: List all resident modules installed by "LoadModule"

NOREBOOT/S: Avoid a reboot even if this would be apropriate. This
is useful for cascading "LoadModule" with other tools
that would reboot the machine anyhow, e.g. MuMove4K.

"LoadModule" tries to reboot the machine whenever it
is invoked for the first time and no resident modules
are found, or whenever it shall be removed and some
modules are installed.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Tiggythecat
Posts: 18
Joined: Tue Aug 17, 2021 5:37 pm

Re: TF1260 IDE not working with beta firmware

Post by Tiggythecat »

i get a guru and can't ever get back to the os
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1260 IDE not working with beta firmware

Post by terriblefire »

Tiggythecat wrote: Sun Sep 26, 2021 10:26 am i get a guru and cant ever get back to the os
https://wordpress.hertell.nu/files/WB31Clean.zip

You have some other software issue then. You might have found a bug in EHIDE or have a CF card that cannot do PIO Mode 4.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF360”