NEW BOM

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
GadgetUK164
Posts: 430
Joined: Fri Jan 04, 2019 2:26 pm

NEW BOM

Post by GadgetUK164 »

Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!
My YouTube Channel - www.youtube.com/GadgetUK164
go0se
Posts: 403
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by go0se »

GadgetUK164 wrote: Wed Jul 01, 2020 3:34 pm Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!
https://www.exxosforum.co.uk/forum/viewt ... 728#p38246
LADmachining
Posts: 41
Joined: Sun Mar 24, 2019 2:19 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by LADmachining »

I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony
User avatar
GadgetUK164
Posts: 430
Joined: Fri Jan 04, 2019 2:26 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by GadgetUK164 »

LADmachining wrote: Wed Jul 01, 2020 4:43 pm I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony
Thanks =D!!!!! And goose too!

EDIT: Parts ordered - good grief that was expensive lol! I found it cheaper to order from Digikey as you can order smaller quantities. RS have large packs of everything...
My YouTube Channel - www.youtube.com/GadgetUK164
richx
Posts: 46
Joined: Sun Aug 11, 2019 5:03 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by richx »

LADmachining wrote: Wed Jul 01, 2020 4:43 pm I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by alenppc »

Wow that RAM is super cheap. Do we know if it actually works with this board?
PaulJ_2.0
Posts: 571
Joined: Sat May 11, 2019 11:32 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by PaulJ_2.0 »

alenppc wrote: Sat Jul 04, 2020 3:51 pm Wow that RAM is super cheap. Do we know if it actually works with this board?
I have quite a few of these, I will have a go now and report back.

Edit:
Diagrom sees and tests them fine, but wont boot OS from IDE at all.
Tried running a memtest from floppy and no joy.

I have -7 not the -6 Above.
User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: Fri Nov 09, 2018 7:12 am
Location: Germany

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by 8 Bit Dreams »

richx wrote: Sat Jul 04, 2020 3:45 pm
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.
already tried - this ram type isn't working
Retro computer hardware & repair in Germany
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by terriblefire »

8 Bit Dreams wrote: Sun Jul 05, 2020 6:46 am
richx wrote: Sat Jul 04, 2020 3:45 pm
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.
already tried - this ram type isn't working
Next time i actually build a board i'll try some of this stuff. Might be a while
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF536 Bulk Order Batch 4 (exxos run)

Post by PhilC »

I've been trying 16m x 16 chips and will try a 32m x 16 chips this week.

I presume a 1m x 8 would be wrong format?
If it ain't broke, test it to Destruction.
Post Reply

Return to “TF536”