A600/TF536 with AmigaOS 3.2 no boot

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Post Reply
Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

A600/TF536 with AmigaOS 3.2 no boot

Post by Aeberbach »

Black screen. WIthout the TF536 it does boot. I tried stripping out the A604n module but no change in behavior.

Has anyone seen a boot with the 2021 3.2 ROM in an A600? I'd be keen to try the xilinx firmware you are using.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by terriblefire »

Aeberbach wrote: Tue Jun 29, 2021 10:40 am Black screen. WIthout the TF536 it does boot. I tried stripping out the A604n module but no change in behavior.

Has anyone seen a boot with the 2021 3.2 ROM in an A600? I'd be keen to try the xilinx firmware you are using.
Have you tried with all hard disks removed? Also try with caches disabled (CDIS) and tell me what you get.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by Aeberbach »

No hard drives (or floppy drives). With no TF536 I get the early boot menu with buttons down, or the kickstart animation if I wait.

With TF536 I still get black screen. No access to two-button gray early boot screen. There's some kind of video signal out because the monitor light is on but no image

I took some 30 gauge kynar wire, put it in the CDIS hole of the CPU socket and tied that to the GND pin on the JTAG header. No change - rainbow when powering on, nothing else.
User avatar
GadgetUK164
Posts: 430
Joined: Fri Jan 04, 2019 2:26 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by GadgetUK164 »

Swap back from 3.2 to anything else official - see if it boots then!
My YouTube Channel - www.youtube.com/GadgetUK164
Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by Aeberbach »

It boots OK with 2.05 (37.300).
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by alenppc »

The 536 won't boot on the A600 with 3.1.4 so I presume it's the same with 3.2. And even with the 3.1 it doesn't exactly work great.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by terriblefire »

With the TF536 in the A600 i expect its looking for the correct gayle ID. People have reported similar issues with the Furia over on EAB.

EDIT: If i wanted to go down the nightmare route of supporting the A600 I would have made a dedicated card for it. Hence A600 is simply not supported by me because i have enough things to do already.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Aeberbach
Posts: 149
Joined: Mon Dec 16, 2019 10:24 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by Aeberbach »

Totally fair - I’m only persisting because of the nice keyboard on it. My A1200 keyboard MPU can’t be far away then I can get the ReAmiga up and going.
Lemaru
Posts: 86
Joined: Sat Feb 08, 2020 9:28 pm

Re: A600/TF536 with AmigaOS 3.2 no boot

Post by Lemaru »

I haven't had any issues with the TF536 on the 600 using 3.1, so I would stick with that if I were you
Post Reply

Return to “TF536”