The DMA fix board arrived thanks to @DoG and it's now installed.
I've also done the 1.44 mod and installed the gotek as described here:
https://exxosforum.co.uk/forum/viewtopic.php?f=78&t=2551
The bootloader comes on but after displaying the fw version I get the Error: LBA change Test Failed! Write Issue? message.
It works when I set everything back to default.
Any ideas?
Robson’s
Re: Robson’s
I don't believe that this issue was resolved and might be worth asking on the FF Github pages.
I don't use the HxC Autoboot HFE tool. Instead, I use and OLED and then use the Gotek buttons to load disk images.
I don't use the HxC Autoboot HFE tool. Instead, I use and OLED and then use the Gotek buttons to load disk images.
Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
Re: Robson’s
IDE is now working. The DMA fix slightly pushes the DOM up. I'll lower it at some point.
Re: Robson’s
Nice. Another H4 and IDE working
Re: Robson’s
Board nr2 that I bought from @Velociraptor.
I was going for it, this is all built today. Only few things left but run out of sockets so will fully complete the board when they're here.
I was going for it, this is all built today. Only few things left but run out of sockets so will fully complete the board when they're here.
Re: Robson’s
Pretty impresses amount of stuff added in just a day!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: Robson’s
After a little bit of sizzling that's cured with IPA bath + drying Board Nr2 is alive.