BLITTER RE-CREATION THOUGHTS

Progress on our FPGA cores.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: BLITTER RE-CREATION THOUGHTS

Post by Icky »

The v3's of the Phoenix Sparkalaphobia for the H4/5 are on their way from the pcb and assembly plant. I hadn't actually realised how small these boards are as the 3D models have been blown up on the screen.

On top of the v2:

IMG_5836.jpeg
IMG_5836.jpeg (177.1 KiB) Viewed 4285 times

How it will be placed on the H/5:

IMG_5839.jpeg
IMG_5839.jpeg (324.45 KiB) Viewed 4285 times
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: BLITTER RE-CREATION THOUGHTS

Post by Icky »

These arrived today. Now to assemble the top side. Looking forward to moving to this board for my development as the original STFM setup I have is not ideal for me. H4/5 is easier to dev on.

IMG_5848 (2).jpeg
IMG_5848 (2).jpeg (132.74 KiB) Viewed 4245 times
IMG_5849.jpeg
IMG_5849.jpeg (292.6 KiB) Viewed 4245 times
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: BLITTER RE-CREATION THOUGHTS

Post by Icky »

sporniket wrote: Mon Oct 26, 2020 4:35 pm Is it me being a noob, or the smd fpga has been replaced by a ball grid array ?
That is correct the FPGA is now BGA based (UBGA to be precise) so it can fit within the Blitter socket space. One the chips are cheaper and two it enables us to get the board down to a reasonable size.
User avatar
agranlund
Posts: 777
Joined: Sun Aug 18, 2019 10:43 pm
Location: Sweden
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by agranlund »

Icky wrote: Mon Oct 26, 2020 4:55 pm
sporniket wrote: Mon Oct 26, 2020 4:35 pm Is it me being a noob, or the smd fpga has been replaced by a ball grid array ?
That is correct the FPGA is now BGA based (UBGA to be precise) so it can fit within the Blitter socket space. One the chips are cheaper and two it enables us to get the board down to a reasonable size.
As someone who knows absolutely nothing about BGA, what techniques and equipment can be used to solder these types of chips at home? :)

I'm seriously impressed with this project!
With the blitters becoming more and more rare this is a huge deal, and maybe open up for adding some additional features (c2p perhaps?)
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: BLITTER RE-CREATION THOUGHTS

Post by terriblefire »

I've always wanted to go BGA but the chips seemed too much of an arse to solder. In the end i found i could solder an ICE40 inside a 84 pin PLCC package and pretty much do what you did here.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: BLITTER RE-CREATION THOUGHTS

Post by Icky »

agranlund wrote: Tue Oct 27, 2020 9:33 am As someone who knows absolutely nothing about BGA, what techniques and equipment can be used to solder these types of chips at home? :)
It can be done at home but is not the easiest to do. Our assemblers can do this for us and have an x-ray machine so they can check there are no shorts or missing contacts underneath.
agranlund wrote: Tue Oct 27, 2020 9:33 am I'm seriously impressed with this project!
With the blitters becoming more and more rare this is a huge deal, and maybe open up for adding some additional features (c2p perhaps?)
Thats the idea is to provide an alternative as they are becoming scarce.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: BLITTER RE-CREATION THOUGHTS

Post by Icky »

terriblefire wrote: Tue Oct 27, 2020 9:57 am I've always wanted to go BGA but the chips seemed too much of an arse to solder. In the end i found i could solder an ICE40 inside a 84 pin PLCC package and pretty much do what you did here.
Yeah - the 84 pin is a little bigger to play with in size, the PLCC 68 doesn't have much room. Am finding that BGA chips are becoming a lot cheaper than the SMT leaded variants.

The most craziest example I have seen for an FPGA in a PLCC-68 package is this and fits directly into the socket. However its very expensive and 3.3V. Just shows how small things are getting. https://www2.hdl.co.jp/en/plink/ap68-10.html

set.200.jpg
set.200.jpg (23.65 KiB) Viewed 4146 times
top.600.jpg
top.600.jpg (152.49 KiB) Viewed 4146 times
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: BLITTER RE-CREATION THOUGHTS

Post by DoG »

I wonder why they did a hole beside each pin? Some kind of stress relieve on the pcb and get some flex in each pin?
User avatar
exxos
Site Admin
Site Admin
Posts: 23494
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Got my board from @Icky All days ago to attempt to solder the uBGA.

I got my new solder paste printer on the go...

Capture.PNG
Capture.PNG (1.22 MiB) Viewed 4062 times
Considering how tiny these pads are it really is amazing that the printer can get down to this resolution :shock: I reflowed the solder as I don't feel confident in lining up the chip by hand without smudging the paste...

After some thinking I needed some way to physically hold the chip in alignment rather than endless trial and error.. So I came up with a template board...

doiibcpafdbjbjkk.png
doiibcpafdbjbjkk.png (94.25 KiB) Viewed 4062 times

The PLCC68 pins I can put in the template and actual PCB, then the FPGA uBGA chip will be aligned with a hole in the template board. So in theory as soon as the printer has pasted, I can use the template to manually align the chip and reflow it in one go..

With the PCB already having the solder melted, I plan to just dose it up with lots of flux and then put the chip on.. I can always press down a little bit now it is held in place with the template to make sure the IC pads are touching on the PCB properly.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “FPGA DEVELOPMENT”