conflict with internal HD and external US in Mega STe
Re: conflict with internal HD and external US in Mega STe
As for your original question. Iirc, you only change the ACSI ID on the ACSI-SCSI host adapter board. The SCSI hard disk always needs to be set to SCSI ID 0. Another option would be to change the ACSI IDs of the Ultrasatan: http://joo.kie.sk/?page_id=255.
- rubber_jonnie
- Site Admin
- Posts: 10618
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: conflict with internal HD and external US in Mega STe
Yes, that is entirely possible.czietz wrote: ↑Sun May 16, 2021 5:26 pm You're right, it doesn't make sense. It's also not true, i.e., both Frank and rubber_jonnie remember it wrong. The original Atari MegaSTE ACSI/SCSI host adapter does pass the ACSI bus through. You can still use external ACSI devices with the host adapter card installed.
(Maybe they were confusing it with the internal Ultrasatan adapter for the MegaSTE. That one indeed disables the external ACSI port.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...