This should work out of the box with Genesis and maybe AmiTCP as Genesis is just a GUI for it.
I think that it could be tinkered to work with Roadshow, as it is just a backport of OS4 tcp stack. I think that I used this http://aminet.net/package/comm/net/NetFS but there is now also this http://aminet.net/package/comm/net/NetFS-revised
I have Roadshow licenses, but I decided to revert back to Genesis, mostly because of nice GUI.
Amiga to Amiga networking over tcp/ip
Moderators: terriblefire, Terriblefire Moderator
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Amiga to Amiga networking over tcp/ip
I use Roadshow for the same reason... because the others have a GUI. I dont see why a TCP/IP stack needs one.utri007 wrote: ↑Mon May 18, 2020 12:52 pm This should work out of the box with Genesis and maybe AmiTCP as Genesis is just a GUI for it.
I think that it could be tinkered to work with Roadshow, as it is just a backport of OS4 tcp stack. I think that I used this http://aminet.net/package/comm/net/NetFS but there is now also this http://aminet.net/package/comm/net/NetFS-revised
I have Roadshow licenses, but I decided to revert back to Genesis, mostly because of nice GUI.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Amiga to Amiga networking over tcp/ip
I continue to get "unknown error code" and I am using Genesis on both Amiga's. I suspect something would have to be running and listening on the other Amiga?
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Amiga to Amiga networking over tcp/ip
Appears that that genesis sets up NetFS. If you are using an ESP module you may need to find out what port that runs on and setup the portmap in the esp router
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Amiga to Amiga networking over tcp/ip
I got it working. I'm using Genesis.
The video in the posts above helped, as it showed that the "Access" must be set to allow any IP to access the Amiga.
But you also have to enable AmigaNetFS in the "Services" tab, there is a tick box that needs to be selected.
Then, it just worked using the NetMount command.
So, yes, there has to be a service running on the Amiga hosting the drives. My CD32 with ESP8266 is able to mount drives from other Amigas in the house, but I cant map the CD32's drives and this is because I need to set the PORTMAP setting as Stephen suggested on a previous post. To do that, the port number is needed....
The video in the posts above helped, as it showed that the "Access" must be set to allow any IP to access the Amiga.
But you also have to enable AmigaNetFS in the "Services" tab, there is a tick box that needs to be selected.
Then, it just worked using the NetMount command.
So, yes, there has to be a service running on the Amiga hosting the drives. My CD32 with ESP8266 is able to mount drives from other Amigas in the house, but I cant map the CD32's drives and this is because I need to set the PORTMAP setting as Stephen suggested on a previous post. To do that, the port number is needed....
-
- Moderator Team
- Posts: 5389
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Amiga to Amiga networking over tcp/ip
Sweet. Nice work.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Amiga to Amiga networking over tcp/ip
A quick bit of Google work, it appears Netfs uses TCP port 2500.
I will test this on the CD32 over the next day or two in between work.
I will test this on the CD32 over the next day or two in between work.
Re: Amiga to Amiga networking over tcp/ip
Confirmed. Amiga Netfs does indeed use port 2500.
I now have CD32 drives mapped on my A4000 (as CD32work: and CD32whdload:), I can view them in shell, DirOpus, no problems.
Looks like Netfs is available on Aminet. Genesis simply launches "netfs-server" in the background when it establishes a connection.
I now have CD32 drives mapped on my A4000 (as CD32work: and CD32whdload:), I can view them in shell, DirOpus, no problems.
Looks like Netfs is available on Aminet. Genesis simply launches "netfs-server" in the background when it establishes a connection.
Re: Amiga to Amiga networking over tcp/ip
Execellent Matt , CD32 networked in 2020, who`d have thunk it
Re: Amiga to Amiga networking over tcp/ip
Hello
Sorry for using this old thread, though perhaps you might shed some lights how to get online, hardware/software side?
As I just got my cdf32 alive again and am awaiting my tf330:)
thanks
Kai, Norway
Sorry for using this old thread, though perhaps you might shed some lights how to get online, hardware/software side?
As I just got my cdf32 alive again and am awaiting my tf330:)
thanks
Kai, Norway