H5 A3 FIXES

Information and progress towards the H5 board.
User avatar
Icky
Site Admin
Site Admin
Posts: 3986
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: H5 A3 FIXES

Post by Icky »

Warning #1 - DO NOT SOLDER IN THE 3.3V REGULATOR

Don't solder in the regulator as it is the incorrect part and the pin out is incorrect.

Will update shortly with the right part number.

EDIT:

If you want to use the part in the BOM (AZ1084CD-3.3TRG1) for the 3.3V bus then there is an option to solder it in like so. I bent the legs in the opposite way and soldered. I just modified it to see if the 3V3 bus was working.

IMG_5862.jpeg
IMG_5862.jpeg (174.33 KiB) Viewed 4262 times

An alternative that will fit correctly is the LM2936Q

https://www.ti.com/lit/ds/symlink/lm293 ... er.it%252F
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: H5 A3 FIXES

Post by exxos »

DO NOT SOLDER IN THE DB19 DMA CONNECTOR.. -

A WIP fix... more to come later...
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: H5 A3 FIXES

Post by exxos »

SIDE0 FLOPPY SHORT FIX


There is a short from pin 21 of the YM2149 to GND at the right hand side hole of the DB19 connector..

short.png
short.png (437.76 KiB) Viewed 4278 times

It is not actually shorting on the top of the hole as it appears to in the image..It is one of the inner layers, but the inner of the via also excludes outwards from the hole which is causing the short.

The only fix I can come up with is to gently file away the hole as indicated below until the short is removed... I'll suggest using a meter to check pin 2 of the external floppy port, to the outer ground while you file to make sure you do not cut too far otherwise you will damage the track next to it which is what I did :(

I would suggest filing the sides of the hole as much as you are filing the top of the hole... Once you break continuity checked both sides of the track on pin 2 of the external floppy connector, to ground, then the YM chip side on pin 21 to ground..

Capture.JPG
Capture.JPG (57.39 KiB) Viewed 4278 times
IMG_5859.jpeg
IMG_5859.jpeg (106.26 KiB) Viewed 4246 times

Once both sides of the track are broken from ground you need to bodge wire from pin 21 of the YM chip to pin 32 of the floppy internal connector...


IMG_5727.JPG
IMG_5727.JPG (370.35 KiB) Viewed 4278 times
Done.



If you file to far you will break the track above which is what I did, and that then needed a bodge wire...

1.jpg
1.jpg (128.37 KiB) Viewed 4278 times
2.JPG
2.JPG (134.24 KiB) Viewed 4278 times
3.jpg
3.jpg (146.73 KiB) Viewed 4278 times

OTHER TRACK LOCATIONS TO CHECK

(2nd track)
2.PNG
2.PNG (86.68 KiB) Viewed 3788 times
2a.PNG
2a.PNG (53.32 KiB) Viewed 3788 times
2b.PNG
2b.PNG (20.23 KiB) Viewed 3788 times

(3nd track)
3.PNG
3.PNG (66.42 KiB) Viewed 3787 times
3a.PNG
3a.PNG (52.74 KiB) Viewed 3787 times
3b.PNG
3b.PNG (45.07 KiB) Viewed 3787 times

(4th track)
4.PNG
4.PNG (55.51 KiB) Viewed 3786 times
4a.PNG
4a.PNG (45.63 KiB) Viewed 3786 times
4b.PNG
4b.PNG (42.28 KiB) Viewed 3786 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: H5 A3 FIXES

Post by exxos »

MONO SELECT FIX

Solder blob pins 2&3 together on the bottom of the PCB.

mono.PNG
mono.PNG (44.96 KiB) Viewed 4261 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: H5 A3 FIXES

Post by PaulJ »

Icky wrote: Tue Oct 27, 2020 3:50 pm Just checked my board and its the right way round.
Just checked and my ic11 is mounted correctly.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: H5 A3 FIXES

Post by PaulJ »

exxos wrote: Tue Oct 27, 2020 11:10 pm Fix #5 - YM AUDIO BIAS FIX (NO AUDIO)


Remove and blob over C60.


IMG_5722.JPG
Just checked and my boards don't have the shorted cap. You didn't order yours with extra solder by any chance?
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: H5 A3 FIXES

Post by exxos »

PaulJ wrote: Thu Oct 29, 2020 8:06 pm Just checked and my boards don't have the shorted cap. You didn't order yours with extra solder by any chance?
huh ? C60 is fitted by default.. You removed it and blob over C60 pads..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: H5 A3 FIXES

Post by PaulJ »

Well shiver my timbers.... I thought the shorted cap was the issue and here its the solution! :dizzy: :chairsmack:
Steve
Posts: 2570
Joined: Fri Sep 15, 2017 11:49 am

Re: H5 A3 FIXES

Post by Steve »

With the 3.3v bus vrm: LM2936Q
please could you specify which package? SOIC, TO-252, VSSOP or SOT-223.
Thank you.
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: H5 A3 FIXES

Post by DoG »

Steve wrote: Wed Nov 04, 2020 11:54 am With the 3.3v bus vrm: LM2936Q
please could you specify which package? SOIC, TO-252, VSSOP or SOT-223...
TO-252 is the footprint for the old part, so I guess the same.
Post Reply

Return to “H5 Phoenix Platform Edition”