H5 A5 BOM (or lack of)

Information and progress towards the H5 board.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: H5 A5 BOM (or lack of)

Post by PaulJ »

@exxos | @Icky, getting ready to shoot the juice to the first H5. First though I have a couple of questions. First what is CN9 for? Since its looks to be a 3.3 volt connection in the 3.3 volt subsystem I'm not populating it. Sj2 looks to be a solder short but its all ready shorted so I'm disregarding it. Lastly j2.. guessing an audio connection. If any of these are required let me know. Thx... :coffee:
User avatar
exxos
Site Admin
Site Admin
Posts: 23493
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: H5 A5 BOM (or lack of)

Post by exxos »

If they are not listed in the jumper thread then you should do nothing and ignore them for now..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
olivier.jan
Posts: 212
Joined: Mon Jun 01, 2020 8:00 am

Re: H5 A5 BOM (or lack of)

Post by olivier.jan »

Hi, after seeing that B1 rev is coming, I decided to try to get my A3 up before the first B1 arrives, I’m halfway through now and was wondering about Y1 as this crystal is not part of the BOM but is clearly visible on the H5 silkscreen, and it seems to be required by the MFP.
I got one from donor machine anyway, but wanted to know before soldering it.
Retro stuff
520 STF/ 1040 STE / Mega ST / 2 Mega STE / 2 H5
2 x 600XL with U1MB /SOFIA 2/ AVG CART / and a few 1050
Apple //c, Commodore 128, Mac Classic, SE/30, LC, IIvi and PB G3 (Clamshell)
Amiga 600 and a few 486 and 386.
Many Nintendo G&W and other electronic games from the late 70s/early 80s.
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: H5 A5 BOM (or lack of)

Post by PhilC »

@olivier.jan yes its the 2ish mhz one that's used by the MFP so a donor from an existing board is perfect.
If it ain't broke, test it to Destruction.
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: H5 A5 BOM (or lack of)

Post by DoG »

I can't remember but the battery(holder) is CR1220, right?
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: H5 A5 BOM (or lack of)

Post by PhilC »

DoG wrote: Sat Aug 07, 2021 4:12 pm I can't remember but the battery(holder) is CR1220, right?
Yes that's right.
If it ain't broke, test it to Destruction.
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: H5 A5 BOM (or lack of)

Post by DoG »

PhilC wrote: Sat Aug 07, 2021 4:18 pm
DoG wrote: Sat Aug 07, 2021 4:12 pm I can't remember but the battery(holder) is CR1220, right?
Yes that's right.
Thx for that. I clearly wasn't reading the first post since exxos specified in the Mouser list a holder that is 1220. :oops: :roll:
Post Reply

Return to “H5 Phoenix Platform Edition”