People keep on complaining they cannot get such a adapter. So I just found the alpha boards I made. I have about five of them. If people are interested in causing themselves huge amounts of pain then I will put them in my store. This is a Alpha board only and was never intended for sale. It has only been tested on my machine. They are being sold "as is" only. Without warranty or support.
These are four layers with the bus pullups and a clock buffer. These are designed to be plugged into the PLCC socket. like you will need a "dummy CPU" (which I cannot provide as my printer is still busted) and there is currently no way to fix this down ( again it was never intended as a final version or sellable version) . So if you buy this you also accept all the related problems to it as well.
https://www.exxosforum.co.uk/atari/store2/#0234
I am currently trying to find how this fitted in the STE.. It is in my blog *somewhere*.
EDIT:
viewtopic.php?f=94&t=3992&p=63265&hilit=ste#p63265
STE TO DIP ADAPTER FOR ST536
STE TO DIP ADAPTER FOR ST536
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STE TO DIP ADAPTER FOR TF536
Are these are the fit-inside-the-socket ones that need a 3D printed plug? If so, I'm keen. Assuming they're not going to be one million pounds!exxos wrote: ↑Tue Dec 07, 2021 1:15 pm People keep on complaining they cannot get such a adapter. So I just found the alpha boards I made. I have about five of them. If people are interested in causing themselves huge amounts of pain then I will put them in my store.
These are four layers with the bus pullups and a clock buffer.
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: STE TO DIP ADAPTER FOR TF536
I think these do fit inside the socket. They just need a plastic square printing the correct size to stop the pins from bending inwards.
I will supply the CPU header pins as they seem to be gold dust in finding. So once the pins are soldered in (and a 68K socket) you are pretty much good to go.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STE TO DIP ADAPTER FOR TF536
Sounds ideal.
I was going to have to investigate making one myself anyway as when I get around to tinkering with my STE, I'll need to break out the CPU pins somehow.
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: STE TO DIP ADAPTER FOR TF536
I might grab one of these to play around with... don't mind a little pain.
-
- Posts: 80
- Joined: Wed Aug 19, 2020 12:56 pm
Re: STE TO DIP ADAPTER FOR TF536
I feel this opens a door to a whole new STE experience.
Will they come, as final product, ready to be used in a plug and play way?
Will they come, as final product, ready to be used in a plug and play way?
Re: STE TO DIP ADAPTER FOR TF536
Nope. PCB only sold "as is". It's not a final product and probably never will be. I am only selling them because people kept pestering about it, I personally don't really have any interest in it.MegaSTEarian wrote: ↑Tue Dec 07, 2021 7:25 pm Will they come, as final product, ready to be used in a plug and play way?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE TO DIP ADAPTER FOR TF536
Two boards ordered.
Nice one Exxos !
Nice one Exxos !
-
- Posts: 80
- Joined: Wed Aug 19, 2020 12:56 pm
Re: STE TO DIP ADAPTER FOR TF536
exxos wrote: ↑Tue Dec 07, 2021 7:33 pmNope. PCB only sold "as is". It's not a final product and probably never will be. I am only selling them because people kept pestering about it, I personally don't really have any interest in it.MegaSTEarian wrote: ↑Tue Dec 07, 2021 7:25 pm Will they come, as final product, ready to be used in a plug and play way?
Ah...Bummer