- What's the jumper for by the ide header? I can't read the silscreen on mine.
- What type of image shold I write to the cf card? I mean, what version of the OS? I had a card from my 1200 that I tried, and it just gave me blank screen. It's WB 3.1
- Without a CF card, it does show the cd32 disc logo. Is that an indication that the card should work?
- Can I hurt anything if I attach a cf card reader backwards. The one I have doesn't have pin1 indicated, so I'm unsure of the orientation.
few troubleshooting questions
Moderators: terriblefire, Terriblefire Moderator
few troubleshooting questions
Re: few troubleshooting questions
you need a jumper on two pins next to IDE as these are the Card enable/ Disable pins
see pic below
it will then boot with your A1200 cf card
see pic below
it will then boot with your A1200 cf card
Re: few troubleshooting questions
Guess I need to build a proper image for the cd32 since it's looking for a floppy.
Re: few troubleshooting questions
Just comment the DF0: out in the Startup-Sequence no need to make another CF
Re: few troubleshooting questions
Thanks.
But what I mean was I need to copy this cf card and get it working on a new one.
But what I mean was I need to copy this cf card and get it working on a new one.
Re: few troubleshooting questions
I recommend Win32diskimager, it’s open source.